BioGuard Lite Blog

BioGuard Lite

BioGuard Lite is a maintenance oxidiser for chlorinated pools with a unique blend of oxidising and clarifying agents. Used weekly in chlorinated or brominated pools, it dissolves almost instantly and destroys chloramines and musty odours. Lite is completely soluble, so it will not cloud the water, and can be used in pools with any surface type. It is also pH neutral, so there no adjustment necessary after applying it. Its clarifying agents aid the filter in removing small suspended particles to help keep the pool crystal clear.

To use Lite:

I. Adjust pH to 7.4 - 7.6.

II. Add Lite while pool is not in use.

III. For pools with non-bleachable surfaces, broadcast 1 bag of Lite per 50,000 litres directly into the deep end of the pool with the pump running. Make sure you apply some product to areas of the pool where circulation is the poorest.

IV. For pools with bleachable surfaces, pre-dissolve 1 bag of Lite in a bucket containing at least 5 litres of clean water, then pour around the pool.

V.Swimming may resume 15 minutes after application.

NOTE: Do not add through the skimmer. Additional treatments may be required after periods of heavy pool usage, significant rainfall or cloudy water. If a there is a need to establish more than 3.0 ppm of free available chlorine, use Burn Out Extreme or Burn Out 35, not Lite. Lite is designed for maintenance only, not for eliminating large amounts of chloramines or establishing a free chlorine residual when the level has dropped too low.

CAUTION: Avoid physical contact with product. Do not store near petroleum products. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.

Lite comes in a convenient 450-gram bag, is easy to use and makes maintenance a simple process. Just add it once a week and you can be back in the pool in just 15 minutes.