BioGuard Optimiser Blog

BioGuard Optimiser

BioGuard Optimiser is a granular product that enhances water comfort, increases water clarity, improves the performance of other products and suppresses the growth of algae. It buffers the water to prevent pH bounce and does not evaporate with exposure to sunlight. Optimiser provides blue, sparkling water and makes the water feel more comfortable to swimmers.

To use Optimiser:

I. Backwash and clean the filter.

II. Balance pool water and adjust pH to between 7.4 - 7.6. Leave the pump running.

III. Broadcast 1.5 kg per 10,000 litres to establish 26 - 32 ppm. Divide into 3 doses and add each third waiting at least 2 hours between each dose. NOTE: Levels higher than 32 ppm do not pose problems, so there is no need to reduce such levels.

IV. Within 10 days retest the Optimiser level. If the level is below 26 ppm, reapply.

Maintenance Dose:

Test the Optimiser level monthly and maintain 26 - 32 ppm. 120 grams per 10,000 gallons increases Optimiser level 18 ppm.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.