BioGuard SPA Shield
BioGuard SPA Shield (Balance Pak 300) raises calcium hardness to help prevent corrosion of equipment and etching of surfaces. Do not use Balance Pak 300 in spas where Perfect Balance is being used.
To use Shield:
I. Perform a complete water analysis and add BioGuard SPA Shield. 10 grams per 1,000 litres increases calcium hardness 10 ppm.
II. Do not pre-dissolve. Broadcast into spa with the circulation running.
III. CAUTION: Never add more than 1/3 of the required amount of Balance Pak 300 at any one time. Wait at least 1 hour between thirds.
IV. Brush up any undissolved product.
NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.
Posted By Red Baron on Friday 29th January 2010 @ 14:10:20
Updated : Wednesday 22nd February 2012 @ 10:15:05 | Words : 128 | Views : 200 | Comments : 0
   |
Blog Categories
Bioguard Pool Product Information
Pool and Spa Industry Fact Sheets
Pool Opening and Closing
Pool Operation and Maintenance
Pool Troubleshooting
Pool Water Balance
Spa Operation and Maintenance
Spa Product Information
Spa Troubleshooting
Spa Water Balance
BioGuard SPA Purity
BioGuard SPA Purity BioGuard SPA Purity (formly Spa Lite) is a unique blend of oxidising and clarif . . .
Posted By Red Baron on Friday 29th January 2010
Words : 164 | Views : 166 | Comments : 0
SpaGuard Oxy-Clear Spa Shock
SpaGuard Oxy-Clear Spa Shock This product is no longer available. . . .
Posted By Red Baron on Friday 29th January 2010
Words : 10 | Views : 148 | Comments : 0
SpaGuard Chlorinated Concentrate
BioGuard SPA Chlorinated Concentrate To use Chlorinated Concentrate: Adjust the pH to 7.4 - 7.6. S . . .
Posted By Red Baron on Friday 29th January 2010
Words : 160 | Views : 186 | Comments : 0
Blogger : red-baron
. . .
Registered Since Tuesday 28th February 2012
Topics : 103 | Comments : 0
Share with Us
